The major difference between the competition and the SSRA kit is that the Super Sucker Ram Air actually scoops in air. It is a two piece kit, with a lower piece sliding into the upper, which attaches under the nose of your car. This scoop is about 2 inches tall and 15 inches wide. This becomes a continuous box(scoop) all the way up to the base of the air filter.

Another major difference is the SSRA is made of black Polypropolene plastic. Polypropolene plastic is very strong, yet forgiving. The black plastic matches the OEM appearance of the car, and looks great. Since the SSRA is plastic it won't heat soak like steel. This will help your car run cooler.

Speaking of running hot. One of SSRA's competitors has a problem with their cold air induction kits making cars run hotter. Tested side by side their kit made the coolants temperature hotter by about 10 degrees and the inlet air temp(IAT) 6-7 degrees. If a car runs to hot it loses horsepower. To avoid this problem, beginning at the top near the air filter, the SSRA angles away from the radiator, unlike the competition. This allows cool air to circulate through the radiator.

For those of you who want to seal off your airbox to achieve a supercharging effect, the SSRA is designed to allow you to do this. Included all necessary materials for sealing and blocking off the SSRA. Best of all the SSRA makes power. A blower fan was placed in front of the nose of the car to simulate airstream. The airstream velocity was measured at 60mph with an anemometer at 10 feet away. On a Dynojet a stock 2002SS Camaro picked up approximately 13rwhp over stock. The SSRA is a quick, easy way to gain horsepower.